Plumbing systems are often overlooked until there’s a problem. Once that problem occurs, plumbing repairs can be costly and time-consuming. Keeping your plumbing systems updated will help prevent problems and save you money in the long run. While plumbing mistakes are inevitable, you can avoid them by following a few simple guidelines.
Using from the Candu Plumbing & Rooter blog
When you are working on a plumbing project, it is essential to have the right tools. Inadequate tools can lead to damage to pipes and fixtures. Many plumbing repairs require specialized tools that you may not have on hand. Buying tools recommended by a professional is a better way to ensure that you don’t accidentally damage them.
Using the wrong tools is not only dangerous, it can cost you thousands of dollars! If you’re not aware of the correct tool for the job, you may end up crimping or deforming the pipe. This will create excess pressure on the pipe and will cause water flow problems. Using the wrong tools can also lead to the pipe breaking, which can be a costly repair.
Using mismatched pipes
When replacing your pipes, be sure to buy the correct kind. Using the wrong type of pipe can cause major problems later on. It’s best to get help from a professional plumber to complete the job correctly. While you may be tempted to perform the project yourself, a professional plumber can prevent you from making a common mistake.
You should not use pipe sizes that are too large or too small for the system. Mismatched pipes will eventually leak or break. This may not happen immediately, but they won’t be strong enough to hold the water. You should also know the material of the pipes. Mixing materials will cause even more problems. For example, you should never connect copper pipes to galvanized pipes because it will lead to corrosion.
Skipping a yearly inspection
The best way to keep plumbing working properly is to have a plumber come and check it for problems at least once a year. This will help you catch any minor problems before they become major. An annual inspection is an inexpensive way to ensure that the plumbing in your home is in good condition. If you are planning to remodel your house in the near future, it will be necessary to have plumbing inspections before you begin the remodeling work.
Even the most diligent homeowner will experience plumbing issues from time to time. From clogged drains to busted septic tanks, plumbing issues can strike any home. While it’s tempting to tackle a plumbing project yourself, you need to know that you don’t have the necessary knowledge and experience to do the job properly. The last thing you want is to get stuck with an expensive plumbing project.
Using Candu Plumbing & Rooter official blog of the most common plumbing mistakes is using PTFE thread tape to connect two pieces of pipe. It can cause weak pressure and clogs. To prevent this, wrap the tape over the pipe threads with the right direction in mind. Make sure that you have pulled the tape over the pipe threads as tightly as possible. https://www.google.com/maps?cid=1661381324081501578 should repeat this process four or six times, ending near the end of the threads.
The application process is relatively simple, but you must remember to wrap the tape in the correct direction. If it is not wrapped in the right direction, the threads will work against the tape and tighten the pipe.
Using a drain snake
The most important thing to remember when using a drain snake is to never force it through a clogged drain. This may damage the pipe or the drain entrance. Instead, uncoil the snake and feed it into the pipe without forcing it. When the auger reaches the blockage, turn the handle slowly and let it move through the drain. You should not push the snake too hard, as this could cause the chemicals to backwash into your face.
When using a drain snake, make sure to use it only in the sink or toilet. The aggressive force of the snake can damage the pipe, especially older galvanized pipes. In extreme cases, the use of a power snake could even cause the entire pipe to break. In addition, the metal used in a plumbing snake could scratch the porcelain of the toilet bowl, resulting in rust.
Candu Plumbing & Rooter
22144 Eccles St, Canoga Park, CA 91304
(855) 522-2638
https://www.sharkplumbers.com/
Recent Comments